1. The color used in the medal badge is in accordance with the international Pantone color card. The color card has a number corresponding to each color. Our paint adjuster assigns the corresponding color according to the proportion of multiple colors. colour. The imitation is a dry paint. We put the imitation color on the line that is higher than the product. After the color is finished, it is baked in the oven at a high temperature, and then the face is processed. The paint on the surface of the product is cut together with the line. After cutting out, the color and the metal surface are the same horizontal plane, and the color is very shiny and bright. The color's high temperature resistance and use time are also longer than the paint finish.
2. Baking lacquer is water-based paint. It is also according to the ratio of multiple colors to match the color you want. After the paint is applied to the product, the moisture will slowly evaporate. After the temperature has been baked, the paint will be painted. Tightly attached to the metal surface of the product, so we look at the color of the paint, you will find that the side paint on the edge of the product is higher than the paint on the bottom, because the water has not evaporated at all when the paint is just up. It is fuller, the back water is scattered and the paint collapses.